Watch our new video on the production of GRP pipes with Hobas centrifugal casting technology

Pipes are no mammals. Nor do they hatch from eggs.

❔ So how is a pipe born?

In our Amiblu world, there’s different ways. One of them is called Centrifugal Casting. Amiblu pipes with Hobas technology are produced in a 100 % computer-controlled process. The manufacturing machine’s arm feeds all raw materials – chopped glass fibers, thermosetting plastics (unsaturated polyester or vinylester resins), and reinforcing agents – into a fast-rotating mold. Layer by layer, in a predefined process, the pipe wall is built up from the outside inwards. The material quantities inserted by the machine are monitored and compared to the desired design values in order to assure that each product is fully traceable with respect to its raw material types and quantities. Once all raw materials have been inserted into the mold, the speed of rotation is increased. High centrifugal forces of up to 75 g press the materials against the mold wall and condense them to a maximum, creating a high quality, very solid and void-free pipe wall. Cold water is used to cool the mold and after the pipe is removed, the pipe ends are trimmed and beveled. Finally, a coupling is mounted onto one end of each pipe.

The centrifugal casting process ensures that the pipes are circular, the wall thickness is uniform over the entire length at exact outer diameter, and the material displays a high longitudinal compressive strength that is particularly important for jacking. Thanks to the three-dimensional chemical bonding of the thermosetting resin, the pipe retains its stability even in very warm environments. The sandwich construction of the wall also ensures that the pipes can withstand high loading without any trouble and enables the pipe’s strength to be customized to suit the specific load directions required.

Click the play button in the video above and see this process in motion!